Power supply: AC 100V 50/60 Hz. >A transformer is required for use outside of Japan. Power consumption: 12 W (power on) 0.2 W (power off).
Dimensions (W x H x D): 453 x 173 x 372 mm / 17.8 x 6.8 x 14.6 in. Format:Direct-drive turntable system (manual). Drive Motor: Brushless DC motor. Turntable: Aluminum die-cast, brass integrated, diameter: 332 mm, weight: approx. 3.6 kg (including rubber sheet).
Rotation speed: 33 1/3, 45, 78 r/min. Rotation speed adjustment range: ±8 %, ±16.Starting torque: 3.3 kg-cm. Starting Characteristic:0.7 s (at 33 1/3 r/min). Wah flutter:0.025 % W. SN ratio (rumble): 78 dB (IEC 98A weighted). Type:Universal S-shaped tone arm, statically balanced. Arm effective length: 230 mm. Tracking error angle: +2° 32' (outer circumference of 30 cm record), +0° 32' (inner circumference of 30 cm record).
Offset angle: 22° (+0° 32'). Arm height adjustment range: 0 to 6 mm. Needle pressure adjustment range: 0 to 4 g (needle pressure direct reading type). Applicable cartridge weight: Without auxiliary weight: 5.6 to 12.0 g, 14.3 to 20.7 g (including head shell), with small auxiliary weight: 10.0 to 16.4 g, 18.7 to 25.1 g (including head shell), with large auxiliary weight: 14.3 to 19.8 g, 23.0 to 28.5 g (including head shell) (including head shell).
Cartridge mounting dimensions: JIS standard 12.7 mm (1/2) mounting distance. Shell terminal lug: 1.2 mm? Turntable x 1, Turntable sheet x 1, Dust cover x 1, Adapter for EP records x 1, Balance weight x 1, Auxiliary weight small x 1, Auxiliary weight large x 1, Shell x 1, Overhang gauge x 1, Cartridge mounting screws (1 set) x 1, PHONO cable x 1 PHONO ground wire x 1, Power cord x 1, Turntable mounting screws (1 set) x 1.
Slip mat and cartridge are not included. To Australia/New Zealand area will be charged. In some cases, Japan Post may be used. Buyers in these areas will be notified.
International Buyers - Please Note. Thank you for your understanding.